Up

Build Guides

Community-contributed build guides

PCB image for those wishing to etch their own board. If using the toner transfer method, don't forget to flip the image horizontally before printing!

The image dimensions are 37.8mm x 28.4mm

A printable template to help drill the button hole in the correct position for a DIY EDTracker. This is for the revision 3 PCB used in conjunction with a Hammond 1551GBK enclosure only.

Omegahunter (from the Frontier forums) put together this guide around his original idea to insert his EDTracker into a plastic box available from Maplin. Thanks Omegahunter and great work ;)

Community member Bartybee wrote this excellent, thorough guide to building a cheap EDTracker using the parts from the Hobby Components head tracker kit (plus some wire). This is a really useful document for anyone wanting step-by-step instructions on building an EDTracker without using our custom PCB. It provides the cheapest route to DIY EDTracker ownership. A big thanks to Bartybee for putting it together and contributing it to the site.

Instruction sheet included with DIY PCBs that we sell (for revision 3 boards)

 
 
Powered by Phoca Download